Jiuding FRP pultruded grating offers strength, rigidity, and high load capacity, it has a very high percentage of fiberglass in the composite matrix. It can support heavier loads and long spans than comparable sized open molded fiberglass grating.
1.Introduction
Jiuding FRP Pultruded Grating comes in two bearing bar styles. We offer both I-Bar and T-Bar style as its main load-bearing and special rod to go through the bearing bar. The surface can be grooved, or gritted, or covered with lozenge panel. Our pultruded fiberglass grating is available in a variety of resin types, colors, heights, thicknesses and panel sizes.
2.Technical parameters
Standard space for cross bar is 6 inch
Type Thickness
(mm) Bar width (mm) Open space
(mm) Open rate
(%) Approx weight(kg/m虏)
JDI-601025.415.222.86013.2
JDI-501025.415.215.25015.9
JDI-401025.415.210.14018.5
JDI-211025.44010.82114.5
JDI-601538.115.222.86015.8
JDI-501538.115.215.25019.1
JDI-401538.115.210.14022.4
JDI-502050.825.425.45016.6
JDI-332050.825.412.73321.1
JDI-60235815.222.86021.6
JDI-50235815.215.25026.3
JDI-40235815.210.14031
3.Advantages
Anti-corrosion and Anti-ageing
Non-conductive
Very designable
Light weight and high strength
Easy of cutting and installation
Abundant color for choice
Low maintenance
4.Application
Operation terrace of chemical factoryStair walkway of chemical industry
Ground floor of sewage factoryTrench cover of electric factory
Sidewalks of pulp and paper industryFoot bridge of water supply and drainage
5.Choice for pultruded grating
鈼廟esin choice: GP resin, ISO resin, VE resin, Phenolic resin
鈼廋olor choice: Yellow, Grey, Green, custom color
鈼廠urface choice:
Groove surfacegrit surfacelozenge cover surface
Shape of bar:
I barT bar
6.Production process
PolishingGriting
CleaningPacking
7.Payment terms ,Delivery and Service
鈭歅ayment: All the payment can negotiate, generally by T/T or L/C.
鈭欴elivery
epends on the quantity,usually about one month
鈭歋ervice: 24 hours online service, technical overseas serviceCustomized FRP Pultrusion Profiles
website:http://www.jiudingcomposite.com/frp-pultrusion-profiles/
1.Introduction
Jiuding FRP Pultruded Grating comes in two bearing bar styles. We offer both I-Bar and T-Bar style as its main load-bearing and special rod to go through the bearing bar. The surface can be grooved, or gritted, or covered with lozenge panel. Our pultruded fiberglass grating is available in a variety of resin types, colors, heights, thicknesses and panel sizes.
2.Technical parameters
Standard space for cross bar is 6 inch
Type Thickness
(mm) Bar width (mm) Open space
(mm) Open rate
(%) Approx weight(kg/m虏)
JDI-601025.415.222.86013.2
JDI-501025.415.215.25015.9
JDI-401025.415.210.14018.5
JDI-211025.44010.82114.5
JDI-601538.115.222.86015.8
JDI-501538.115.215.25019.1
JDI-401538.115.210.14022.4
JDI-502050.825.425.45016.6
JDI-332050.825.412.73321.1
JDI-60235815.222.86021.6
JDI-50235815.215.25026.3
JDI-40235815.210.14031
3.Advantages
Anti-corrosion and Anti-ageing
Non-conductive
Very designable
Light weight and high strength
Easy of cutting and installation
Abundant color for choice
Low maintenance
4.Application
Operation terrace of chemical factoryStair walkway of chemical industry
Ground floor of sewage factoryTrench cover of electric factory
Sidewalks of pulp and paper industryFoot bridge of water supply and drainage
5.Choice for pultruded grating
鈼廟esin choice: GP resin, ISO resin, VE resin, Phenolic resin
鈼廋olor choice: Yellow, Grey, Green, custom color
鈼廠urface choice:
Groove surfacegrit surfacelozenge cover surface
Shape of bar:
I barT bar
6.Production process
PolishingGriting
CleaningPacking
7.Payment terms ,Delivery and Service
鈭歅ayment: All the payment can negotiate, generally by T/T or L/C.
鈭欴elivery
epends on the quantity,usually about one month鈭歋ervice: 24 hours online service, technical overseas serviceCustomized FRP Pultrusion Profiles
website:http://www.jiudingcomposite.com/frp-pultrusion-profiles/