Description
This machine is the specifical forming equipment for producing the expressway guardrail.The complete machine adapts the cold forming,cold punching,automatic strack,industrial automation controlingsystem and precision machine techonology,therefore it can run full automatically,including decoiling,forming,cutting to length and stacking.
Main Specification
NO.ItemUnitMain Specification
1Material Thicknessmm1.5-2.0
2Forming Speedm/min15
3Roll Station/14 stations (depend on the profile)
4Main Powerkw11
5Hydraulic Powerkw4
6Comtrol System/PLC Panasonic/Siemens
7Drive/by chain
8Material of Roller/GCR15 quenched 58°-62°
9Material of Cutting/Cr12,quenched 58°-62°
10Material of Shaft/40Cr heat treatment
11Shaft Diametermm￠70
Flow Chart
Drawing Chart
Equipment Maintenance
Meticulous daily maintenance plays an important part in extending the guard rail roll forming machine's operation time and the quality of the rolling plank. The following steps should be part of the machine's daily production and usage routine.
1.Regularly lubricate the outside parts of the guard rail roll forming machine, i.e., driving chain, etc.
2.Regularly wipe the surface of roller, particularly when working outside. If you do not use the machine a long time of time, you should daub lube in the roller surface. Make sure you clean it the next time you use the machine.
3.If the guard rail roll forming machine is not used for a long period of time, make sure you cover it with plastic or cloth. Avoid getting rain on the machine or the machine becoming damp, especially the electric control box.
4.Make sure the cutting system is lubricated when necessary.
5.Check the hydraulic station often and the oil quantity of the deceleration machines. Add more oil if the oil level is low.
6.Check the electric appliances box and every leads conjunction circumstance of the guard rail roll forming machine. Dust the machine often.Guardrail Forming Machine in stock
website:http://www.steelrolltech.com/roll-forming-machine/guardrail-forming-machine/
This machine is the specifical forming equipment for producing the expressway guardrail.The complete machine adapts the cold forming,cold punching,automatic strack,industrial automation controlingsystem and precision machine techonology,therefore it can run full automatically,including decoiling,forming,cutting to length and stacking.
Main Specification
NO.ItemUnitMain Specification
1Material Thicknessmm1.5-2.0
2Forming Speedm/min15
3Roll Station/14 stations (depend on the profile)
4Main Powerkw11
5Hydraulic Powerkw4
6Comtrol System/PLC Panasonic/Siemens
7Drive/by chain
8Material of Roller/GCR15 quenched 58°-62°
9Material of Cutting/Cr12,quenched 58°-62°
10Material of Shaft/40Cr heat treatment
11Shaft Diametermm￠70
Flow Chart
Drawing Chart
Equipment Maintenance
Meticulous daily maintenance plays an important part in extending the guard rail roll forming machine's operation time and the quality of the rolling plank. The following steps should be part of the machine's daily production and usage routine.
1.Regularly lubricate the outside parts of the guard rail roll forming machine, i.e., driving chain, etc.
2.Regularly wipe the surface of roller, particularly when working outside. If you do not use the machine a long time of time, you should daub lube in the roller surface. Make sure you clean it the next time you use the machine.
3.If the guard rail roll forming machine is not used for a long period of time, make sure you cover it with plastic or cloth. Avoid getting rain on the machine or the machine becoming damp, especially the electric control box.
4.Make sure the cutting system is lubricated when necessary.
5.Check the hydraulic station often and the oil quantity of the deceleration machines. Add more oil if the oil level is low.
6.Check the electric appliances box and every leads conjunction circumstance of the guard rail roll forming machine. Dust the machine often.Guardrail Forming Machine in stock
website:http://www.steelrolltech.com/roll-forming-machine/guardrail-forming-machine/