Function 3P CB ATS
Model type STS-63 series automatic transfer switch is a new generation of the latest development products, ATS generally used to monitor the power supply circuits. When the power failure, ATS will changeover to backup power automatically, so that complete conversion power supply system.
At present, in particular suited for the important electricity power places where disallow to failure, in order to meet the needs of the scene, automatic switch has self-input and self-recover, self-input without self-recover, utility to utility, utility- generators work with a variety of functions, the product applied in 240V, AC 50Hz, rated current from 10A to 1250A(CB class) autocratically switch products.
3P CB ATS Technical Parameter 3P CB ATS
Model typeSTS-63
Rated working voltage220V AC 50Hz
Changeover time delay0.5s
Recovery delay0.5s~90s continuous resettable
Under voltage changeover value145V~210V continuous resettable
Overvoltage changeover value230V~300V continuous resettable
Changeover timeLess than 4s
TypeCB type
Pole3 pole,
CertificateCE, AAA
Features 3P CB ATS
鈼廇lternative work by automatic and manual operation, changeover type is auto switch and auto recovery
鈼廎ull function of overload and short circuit protection
鈼?Monitoring the two sources, whether is loss phase, under voltage, loss voltage and such abnormal conditions, the indication show whether in located normal voltage
鈼廡here is a team with dry output contact for standby generators for start up and shut down
鈼廋onversion type is self-input and self-recover
Applicable Working
Ambient temperature-5~+40鈩?/p>
Altitude鈮?000 m
Relative humidity鈮?5%
Pollution levelII.
Installation locationFree from explosive danger, air or conductive dust which may cause corrosion of metalCB ATSE price
website:http://www.spdsuplo.com/cb-atse/
Model type STS-63 series automatic transfer switch is a new generation of the latest development products, ATS generally used to monitor the power supply circuits. When the power failure, ATS will changeover to backup power automatically, so that complete conversion power supply system.
At present, in particular suited for the important electricity power places where disallow to failure, in order to meet the needs of the scene, automatic switch has self-input and self-recover, self-input without self-recover, utility to utility, utility- generators work with a variety of functions, the product applied in 240V, AC 50Hz, rated current from 10A to 1250A(CB class) autocratically switch products.
3P CB ATS Technical Parameter 3P CB ATS
Model typeSTS-63
Rated working voltage220V AC 50Hz
Changeover time delay0.5s
Recovery delay0.5s~90s continuous resettable
Under voltage changeover value145V~210V continuous resettable
Overvoltage changeover value230V~300V continuous resettable
Changeover timeLess than 4s
TypeCB type
Pole3 pole,
CertificateCE, AAA
Features 3P CB ATS
鈼廇lternative work by automatic and manual operation, changeover type is auto switch and auto recovery
鈼廎ull function of overload and short circuit protection
鈼?Monitoring the two sources, whether is loss phase, under voltage, loss voltage and such abnormal conditions, the indication show whether in located normal voltage
鈼廡here is a team with dry output contact for standby generators for start up and shut down
鈼廋onversion type is self-input and self-recover
Applicable Working
Ambient temperature-5~+40鈩?/p>
Altitude鈮?000 m
Relative humidity鈮?5%
Pollution levelII.
Installation locationFree from explosive danger, air or conductive dust which may cause corrosion of metalCB ATSE price
website:http://www.spdsuplo.com/cb-atse/